Transistor Subs app icon

IPHONE & IPAD APPBy Pedal Pimp

Transistor Subs

Vintage parts. Modern subs. Zero guesswork.

Transistor Subs finds modern replacements for vintage transistors and diodes in seconds, with pinout drawings and spec checks, offline.

Download on the App StoreFor iPhone and iPad. Requires iOS 16 or later (iPhone 8 or newer). Camera scanning needs iPhone XS or newer.
Transistor Subs: Part page for 2SC3281 with its pinout drawing

The part is dead. The fix is in your pocket.

Let’s set the scene. A 1970s receiver is on the bench, the lid is off, and somewhere on the main board a tiny black transistor stamped C1345 has quietly given up. That little guy hasn’t been made since disco was still a going concern. Now begins the ritual every restorer knows by heart: forum threads, cross-reference PDFs, a datasheet that may or may not be in Japanese. Twenty minutes later you’re still squinting at the legs, wondering whether E-C-B is about to become B-C-E the hard way.

Here’s the thing: it doesn’t have to be like that. Punch the number into Transistor Subs and you get modern replacements, a drawing of the package with every leg labelled, and a side-by-side check of voltage, current, power and speed. Rated lower than the original? It tells you. Different pinout? It shows you. One of the era’s notorious noisy, leaky troublemakers? It flags it. Replace on sight.

Every pinout is badged by how well it’s sourced — Verified, One source, Standard layout, Check pinout or Unconfirmed — and every replacement is badged Direct, Conditional or Not recommended.

The numbers: more than 300 vintage transistors and nearly 150 diodes, from germanium relics to the big output devices that powered hi-fi’s golden age, plus the bias diodes and Japanese zener families that have tripped up more than a few of us. The search is forgiving, too. C1815, 2SC1815 and 2SC1815Y all end up in the same place. And if you’re restoring gear on the other side of the Atlantic, many parts come with a European-stock option, because nobody wants to wait three weeks on an overseas shipment.

Squinting at a number stamped smaller than a grain of rice? Skip the typing. Point your iPhone at the marking on a transistor or diode and Transistor Subs reads it and finds the part, offline, with nothing stored or sent anywhere. The results are colour-coded at a glance: orange if it’s on the Replace on sight list, amber if it’s on the Watch list, and green when the app has a card for it.

Everything lives on your phone or iPad. No account, no ads, no signal required. (If your workshop is in a basement, you’ll appreciate that last one.)

Transistor Subs comes straight off the Pedal Pimp bench in Toronto, built from real repair notes, service literature and manufacturer datasheets. It’s the reference I always wanted within arm’s reach of the soldering iron. So I made it.

It won’t do the soldering for you. But it’ll get you to the soldering a whole lot faster.

Screenshots

On iPhone · scroll for more
Transistor Subs: Search tab with C1815 typed in
Find a modern sub in seconds
Transistor Subs: camera scan showing 2SC458 flagged Replace on sight
Scan a part: orange means replace on sight.
Transistor Subs: camera scan showing PN2222A with its card
Green means the app has a card. Tap to open it.
Transistor Subs: Part page for 2SC3281 with its pinout drawing
See the pinout before you solder
Transistor Subs: Replacement spec tables for the 2SD844
Every replacement spec-checked
Transistor Subs: The Replace tab of known-bad parts
Known-bad parts, flagged
Transistor Subs: Part page for the W02 round bridge rectifier
Diodes, bridges and zeners too
Transistor Subs: The Info tab explaining the pinout and substitute badges
Every pinout and sub, graded
Transistor Subs: The launch screen with the Pedal Pimp card
Built at the bench by Pedal Pimp

Support

Found a wrong sub or a missing part?

Email pedalpimpshop@gmail.com with the part number, the equipment it came from and, if you can, the board position (for example Q407). Corrections are checked against manufacturer datasheets before they go into an update.

Using the app

  • Search finds parts with or without the “2S” prefix and gain-grade letter: C1815, 2SC1815 and 2SC1815Y all find the 2SC1815.
  • Drawings show in-line parts with the flat or printed face toward you, leads down, read left to right. TO-3 and TO-66 power cans are drawn from the bottom; the case is the collector.
  • A “Pinout” warning means the replacement’s legs are in a different order from the original. Bend or cross the legs to match the board, or turn the part round if that lines them up.
  • Camera scan: tap the camera button on the Search tab. Hold the part right side up so the writing reads left to right, get close with good light, and keep the printed face flat to the camera. Tap a result to open its card. Grey results are possible matches — check the part, then tap the right one.
  • Search now finds any part containing what you type from two characters, with exact part numbers first.
  • Always check the board and the replacement’s datasheet before you solder, and match NPN or PNP.

Privacy Policy

Last updated November 14, 2026

Transistor Subs is made by Pedal Pimp. This policy explains what the app does with your information: nothing.

  • No data collected. The app does not collect, store or send any personal information. It has no accounts, sign-in, analytics, advertising or tracking.
  • Works offline. All part data is built into the app. Your searches stay on your device and are never sent anywhere.
  • Camera. The app uses your camera only when you open the part scanner. Text is read on your device using Apple’s built-in text recognition. Images are never saved, stored or sent anywhere, and the camera turns off when you close the scanner. You can turn camera access off at any time in Settings.
  • Website link. The app links to pedalpimp.ca. If you tap it, your browser opens this website.
  • Children. The app is suitable for all ages and collects no information from anyone, including children.
  • Changes. If this ever changes, we will update this policy and the app’s App Store privacy details before the change takes effect.
  • Contact. pedalpimpshop@gmail.com

Terms of Use

Last updated November 6, 2026

These terms apply to the Transistor Subs app (“the app”), made by Pedal Pimp (“we”, “us”). By downloading or using the app you agree to them. Apple’s standard Licensed Application End User License Agreement also applies.

  1. Reference only. The app is a reference tool for people repairing electronic equipment. Its substitutions, pinouts, ratings and notes are compiled from service literature, manufacturer data and repair experience. They may be incomplete, out of date or wrong.
  2. Check before you solder. You are responsible for confirming every replacement against the manufacturer’s datasheet and the equipment’s service manual before using it, including polarity, pinout, voltage, current, power and safe operating area. A substitution that works in one circuit may not work in another.
  3. Electrical safety. Vintage audio equipment can hold lethal voltages, even when unplugged. Work on it only if you are qualified to do so, and discharge filter capacitors before touching internal parts.
  4. No warranty. The app is provided “as is” and “as available”, without warranties of any kind, express or implied, including fitness for a particular purpose and accuracy of information.
  5. Limitation of liability. To the fullest extent the law allows, we are not liable for any damage to equipment or property, personal injury, lost profits or other loss arising from your use of the app or its information. Where liability cannot be excluded, it is limited to the amount you paid for the app.
  6. Trademarks. Manufacturer and brand names in the app are used only to identify parts and equipment. They belong to their owners, who do not sponsor or endorse the app.
  7. Our content. The app’s design, drawings, notes and compilation belong to Pedal Pimp. You may use them for your own repair work but may not copy, resell or republish the app’s database.
  8. Changes. We may update the app and these terms. Continuing to use the app after an update means you accept the revised terms.
  9. Governing law. These terms are governed by the laws of the Province of Ontario and the federal laws of Canada that apply there.
  10. Contact. pedalpimpshop@gmail.com

Transistor Subs is made by Pedal Pimp, Vintage Audio Restoration, Toronto.

Transistor Subs.

Available now for iPhone and iPad. No account, no ads, no signal required.

Download on the App Store